- 0 videos
- 0 subscribers
- 2 playlists
About
Genius 5000L XRF Handheld Alloy Analyzer
Introduction:
The Genius 5000L XRF handheld alloy analyzer is our new handheld XRF instrument based on the Genius 5000 handheld alloy analyzer, which has been modified for the gas charging system. The instrument can effectively improve the detection ability of the XRF handheld alloy analyzer for light elements such as Mg, Al, and Si in the alloy when filled with helium. Reduce the influence of light elements in the alloy on the measurement of other elements after normalization. So as to effectively improve the detection accuracy of each element in the alloy.
Light element detection advantages:
By optimizing the helium gas filling pipeline, the efficiency of helium use is improved and the consumption of helium is reduced. At the same time, the ability to detect light elements in alloys is effectively improved, and aluminum alloys and titanium alloys can be effectively classified to meet specific customers' needs for light element detection.
Advantages of alloy testing:
1. Fast non-destructive testing, fast alloy grade analysis of samples in 1-2 seconds, and laboratory precision measurement within 10 seconds.
2. Professional alloy analysis software, embedded with hundreds of common alloy grades, free switching between Chinese and English interface, easy operation, even non-technical personnel can easily operate.
3. A variety of alloy analysis modes, including "quantitative analysis mode (ppm)", "qualitative analysis mode", etc., built-in multiple strength correction methods, which can correct deviations caused by different geometric states.
4. The unique adjustable factor technology based on the basic parameter method supports users to establish more accurate alloy analysis modes.
5. With the function of dynamic matching information, test results, sample brand numbers, and matching information are displayed on the test interface and can be switched.
Details:
Measuring element range: Elements between magnesium (Mg) and uranium (U) can be measured.
Simultaneous detection of elements: dozens of elements can be analyzed simultaneously
Processor and memory: CPU: CPU: 667MHz, memory: 256M, extended storage supports up to 32G, standard 2G, can store mass data.
Content range: ppm锝?9.99%
Detection time: 1-30 seconds
GPS, WIFI built-in system
Battery life: Rechargeable lithium battery, the maximum capacity of the battery is 7800mAh, which can work continuously for 8 hours; it is equipped with a wide voltage 110V-220V universal adapter, which can be used with AC power supply.
Detection object: solid, powder
Detector: 25mm2, SDD detector
Detector resolution: as low as 139eV
Excitation source: 50KV/100渭A Silver target end window integrated micro X-ray tube and high voltage power supply
Collimator and filter: 4.0mm and 2.0mm diameter collimators, 6 kinds of filter combinations automatically switch, 12 kinds of combinations, the world's most combination methods, can meet the test of various types of samples
Video system: high-definition camera
Display: transflective LCD touch screen with a resolution of 640*480
Detection limit: the lowest detection limit reaches ppm level
Detection window: 桅12mm
Security: Self-contained password administrator mode, data can be saved at will
Inflatable system: Atmospheric pressure helium gas system, which can effectively detect light metals after matching
Data transmission: digital multi-channel technology, SPI data transmission, fast analysis, high count rate
Waterproof mini USB, and can be connected to a desktop computer.
Operating environment humidity: 鈮?0%
Operating environment temperature: -20鈩冿綖+50鈩?
Apparatus dimensions: 234脳306脳82mm (L脳H脳W)
Alloy industry application:
Genius 5000L XRF is the newly developed enhanced detection analyzer for light alloy samples. The detection capability for light elements is 2 to 3 times that of ordinary alloy analyzers. The sample to be tested can be various tangible alloy objects such as solids and debris.
It can accurately detect Si and Al elements in steel materials, Si and Al in copper alloys, Mg, Al, and Si in aluminum alloys; it can effectively classify and recycle aluminum alloys.
Core application areas:
Steel analysis and recycling
Copper alloy analysis and recovery
Aluminum alloy classification
Genius 7000L XRF Handheld Alloy Analyzer
Introduction:
The Genius 7000L XRF handheld ore analyzer is a new type of handheld XRF instrument based on the Genius 7000 handheld ore analyzer that is modified by our company. The instrument can effectively improve the detection ability of the XRF handheld ore analyzer for light elements such as Mg, Al, Si, P, S in the ore under the state of helium gas.
This product can be used as a mineral exploration tool for raw ore, tailings, and concentrates. A helium filling device is added to the original Genius 7000, which can better detect light elements in raw ore, tailings and concentrates. This equipment has passed strict testing and verification, all indicators meet the relevant technical requirements, and the technology has reached the international advanced level.
Light element detection advantages:
By optimizing the helium gas filling pipeline, the efficiency of helium use is improved and the consumption of helium is reduced. At the same time, it effectively improves the detection ability of light elements in the ground and mine, and can perform effective light element detection on raw ores and tailings to meet the light element detection needs of specific customers.
Industry application advantages:
1. Fast non-destructive testing, rapid analysis of samples in 1-2 seconds, laboratory precision measurement within 10 seconds.
2. Professional ore analysis software, free switching between Chinese and English interface, easy operation, even non-technical personnel can easily operate.
3. Establish a light element detection mode specifically for ore, increase the detection limit of light elements, multiple mineral analysis modes, including "quantitative analysis mode (ppm)", "qualitative analysis mode", etc., built-in multiple intensity correction methods, which can be corrected Deviations caused by different geometric states.
4. The unique adjustable factor technology based on the basic parameter method supports users to establish more accurate alloy analysis modes.
5. With the function of dynamic matching information, test results, sample brand numbers, and matching information are displayed on the test interface and can be switched.
Details:
Measuring element range Elements between magnesium (Mg) and uranium (U) can be measured.
Simultaneous detection of elements dozens of elements can be analyzed simultaneously
Processor and memory CPU: 667MHz, memory:256M, extended storage supports up to 32G, standard 2G, can store mass data.
Content range ppm锝?9.99%
Detection time 3-30 seconds
GPS, WIFI Built-in system
Battery life Rechargeable lithium battery, the maximum capacity of the battery is 7800mAh, which can work continuously for 8 hours; it is equipped with a wide voltage 110V-220V universal adapter, which can be used with AC power supply.
Detection object solid, powder
Detector 25mm2, SDD detector
Detector resolution as low as 139eV
Excitation source 50KV/100渭A Silver target end window integrated micro X-ray tube and high voltage power supply
Collimator and filter 4.0mm and 2.0mm diameter collimators, 6 kinds of filter combinations automatically switch, 12 kinds of combinations, the world's most combination methods, can meet the test of various types of samples
Video system high-definition camera
Display transflective LCD touch screen with a resolution of 640*480
Detection limit the lowest detection limit reaches ppm level
Detection window 桅12mm
Security Self-contained password administrator mode, data can be saved at will
Inflatable system Atmospheric helium gas system, which can effectively detect light elements in ore samples after selection
Data transmission digital multi-channel technology, SPI data transmission, fast analysis, high count rate;
Waterproof mini USB, and can be connected to a desktop computer.
Operating environment humidity 鈮?0%
Operating environment temperature -20鈩冿綖+50鈩?
Apparatus dimensions 234脳306脳82mm (L脳H脳W)
Instrument weight 1.9Kg (with battery), 1.6Kg (without battery)
Mineral industry applications:
Genius 7000L XRF is our newly developed professional enhanced detection analyzer for light elements in ore samples. The detection capability for light elements is 2 to 10 times that of ordinary unfilled helium conventional analyzers. The tested samples can be various tangible ore samples such as solids, debris, and powder.
For example, it can accurately detect Si, Mg, Al, S, P elements in iron ore samples, P, Mg in phosphate rock, Mg, Al, and Si in clay, etc.; The tailings can be effectively classified and recycled.
Core application areas:
Mineral and geological prospecting
Core inspection
Mining process control
Grade control XRF Spectrometer price
website:http://www.chinalabequipment.com/chemical-analytical-instrument/xrf-spec trometer/
Social links
Playlists
Loading...
Videos from johnsonr
- Sorry, there are no videos to show.